Technical Information
C.B. Fabrications kiosks are supplied ready for immediate use fitted out to the customers individual requirements.
The six smaller kiosks in the range ( 1.2 x 1.2 metres through to 2.4 x 2.4 metres ) are manufactured as a single moulding, eliminating the need for internal flanging, which in the smaller kiosks creates a lighter, less cluttered interior. The larger kiosks in the range are built as multiples of the smaller units.
WALLS AND ROOF COSTRUCTION
- Double skin G.R.P. encapsulating 18mm C.F.C.
- FREE high-density polyurethane foam INSULATION (U-value approx. 1.2 W/m2 Degrees C.
- Average sound reduction of 15-25 db in the 100-5000 CPS range.
EXTERNAL FINISH:
- Isopthalic polyester gelcoat resin pigmented to a range of B.S. or RAL colours
INTERNAL FINISH:
- Washable acrylic eggshell paint over textured coating.
TIMBER INSERTS:
- Timber inserts can be added to support shelving or for other load bearing applications
WINDOWS AND DOORS:
- 4mm toughened glass in anodised aluminium frames ( there are also a limited amount of powder coated colours at extra cost.)
WINDOWS:
- available in a variety of styles including Fixed panes, Vertical and Horizontal Sliders, ticket and document issue and retrieval etc.
DOORS:
- supplied either fully/half glazed and fitted with a 5 lever lock.
- Double door configuration available for instrument housing units.
FLOOR
- 3mm ribbed rubber matting or heavy duty vynal floor tiles over 18mm WBP grade plywood on 25mm insulation.
- A vapour barrier to be positioned between the kiosk and the concrete plinth is also supplied as are holding down bolts and sealant.
ELECTRICS:
Standard electrics include:
- 1 NO Fluorescent light fitting ( 2 on 2.4 x 2.4 kiosks ) and switch.
- 1 NO 13 amp switched double socket wired via surface mounted mini trunking to a 2 way consumer unit with M.C.B's.
- Extra electrical installation work can be carried out on request.
FITTINGS:
Various internal and external features are available including:
- shelves
- cash and document draws
- heaters and ventilators
- shutters and security grills etc
Prices on application.
All kiosks must be mounted on a level concrete plinth which should be a minimum of 100mm thick and extend at least 50mm beyond the perimeter of the kiosk.